Proximity Reader

 GS 25/GS 25A / LBR 100/LBR 200


New Housing Design RFID Readers
 

Introduction

Promag new-housing design RFID readers are high performance proximity readers featuring long range and small dimensions. 

The readers run from any voltage from 5 to 12.5V DC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. 

The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, and RS232 serial ASCII output, making it easy to upgrade existing installations.
 

Features

  • New stylish housing to match modern construction

  • Wide Voltage range

  • Potted for environmental protection

  • Externally programmable interface

  • Weather resistant 
 

Specifications

  • Power Requirements: 5 ~ 12.5 V DC regulated, linear

  • Interfaces Wiegand, MSR ABA Track2 or RS232

  • Read Range:

    • GP25   Up to 25 cm at 12.5V with ISO card

    • GP25A  Up to 25 cm at12. 5V with ISO card

    • LBR100 Up to 20 cm at 12.5V w/ISO card

    • LBR200 Up to 5 cm at 12.5V w/ISO card(Mifare UID Reader)

  • Frequency 125KHz, ASK, 13.56MHz Mifare UID

  • Transponder Read only

  • Dimensions:

    • GP25 - 120 x52 x22 mm

    • GP25A  - 120x46x 21mm

    • LBR100/LBR200 - 105 x106 x18 mm

  • Temperature Range Readers: -25 ~ 65 Deg C

  • Transponders: -55 ~ 80 Deg C

Note: The Specification is subject to change without notice.
 

Available versions

  • GP25   Up to 25 cm read range, wall-mounting

  • GP25A  Up to 25 cm read range, wall-mounting

  • LBR100 Up to 20 cm read range, wall-mounting for European type of light box

  • LBR200 Up to 5cm read rang, wall-mounting for European type of light box

NOTE:

Specification is subject to change without notice

Matching New Design housing RFID tags are available
Click here for Catalog