|
|
MF-7 |
Introduction
The MF7 is a very high performance proximity reader. This well-designed reader is packed with technical features that have medium range capability and a small footprint.
The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range.
The MF7 reader also comes with a variety of Three-In-One interface, RS-232, MSR ABA TK2 and Wiegand interfaces allowing it to integrate with a variety of applications, especially security access control.
|
Features ◊ Reading distance: up to 50mm ◊ Frequency: 13.56 MHz ◊ Read Mifare UltraLight and MF1 Standard cards
◊ Three -In -One interface, with Wiegand, MSR ABA TK2 and ◊ Fast data transfer ◊ Weather resistant ◊ High data integrity ◊ User convenience ◊ Easy to install ◊ Available installed on metal surface |
-
Electrical
-
Power Requirements:5~18 Volts regulated DC at 200 mA typical. A linear regulator is recommended.
-
Interface:
-
Wiegand
-
MSR ABA Track2
-
RS232
-
Or special customized specifications.
-
-
Interface Cable - 90 cm
-
Read Mifare MF1 standard cards for 1024/4096 byte and Mifare UltraLight cards of EEPROM size 512bit for ISO 14443A
-
Typical Maximum reading distance: Up to 50mm at 5~12V with Mifare card In ideal conditions.
-
Operating frequency: 13.56MHz standard
-
Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type A
-
External control Audio / Visual Indication: Internal LED and Buzzer
-
-
Mechanical
-
Dimensions: 83 (L) x 47 (W)x 16(H) mm
-
Housing material: ABS
-
-
Environmental
-
Operating temperature Range: -10 to 60 Deg C
-
Operating relative Humidity: 10 ~ 90%
Note: The Specification is subject to change without notice.
-
|
Application
|
|
Available versions
|
