|
|
Configurable MifareŽ (MAD) Sector Reader MF-700 |
Introduction
MF700 is an user configurable MifareŽ sector data reader. It can be configured to read MifareŽ card with MAD1/MAD2 standard in a MifareŽ application open system, or can be configured to read the user-defined sector data (Non-MAD) in a user defined closed system.
Output interface is able to configure as an RS232 output or Wiegand output or ABA TK2. For Wiegand output is selectable from 26 bits to 128 bits.
MF700 also can be set with a Reader ID number for multi-unit communication.
|
Features ◊ Available install on metal surface. ◊ Support MAD1/MAD2 standard and customer MAD-AID setting. ◊ Support Non-MAD format with user-defined sector number. ◊ Anti-Collision. ◊ Support Multi Sectors. ◊ Read MifareŽ Standard 4K or MifareŽ Standard 1K card. ◊ Set Reader ID number for multi-link application. ◊ Three output interfaces: Wiegand (Default)/RS232/ABA TK2. ◊ Wiegand output is selectable from 26 bits to 128 bits. ◊ RS232 output packet can be set with Header, Reader ID and Trailer. ◊ Internal LED and buzzer are configurable. ◊ Weather resistant. |
-
Electrical
-
Power Requirements: DC 7.5 V~12 V / 150mA
-
Card Type: MifareŽ Standard 1K/4K Card
-
Card Format: MAD1/MAD2 support
-
RF Frequency: 13.56MHz Standard
-
RF Distance: 50mm (With MFA01 Card)
-
External control Audio / Visual Indication: Internal LED and Buzzer
-
-
Mechanical
-
Dimensions: 83 (L) x 47 (W)x 16(H) mm
-
Housing material: ABS
-
-
Environmental
-
Operating temperature Range: -10 to 60 Deg C
-
Operating relative Humidity: 10 ~ 90%
Note: The Specification is subject to change without notice.
-
|
Application
|
|
Available versions
|